The PuriFalls® and PondSweep®
Skimmer system that PondSweep Manufacturing makes is scientifically designed
to achieve the best results in cleaning your pond and keeping its ecosystem
balanced.
|
 |
Typical garden or fishpond construction
elements:
1. The new cross-flow design of our skimmer assures that even the largest
pumps (20,000 gph in the PS1500) will be protected by a leaf net and uncut
filter mats.
2. Surface water is drawn into the bellows weir opening. Our patented
bellows-weir design dramatically increases pond skimming and also simplifies
skimmer and pump maintenance.
3. Our constant-flow design forces more water through the mats even when
dirt partially blocks the flow of water through the skimmer. One glance will
tell you when the mats should be cleaned out.
4. Bulkhead Fitting (sandwiching liner): The bottom drain inlet goes through
the liner near the surface and next to the skimmer, not through the pond
bottom.
5. Autofill Valve (optional): Maintains water level without the need to monitor.
Less water is added at one time, preventing problems caused by adding cold
water and over chlorinating.
6. External or submersible, standard or high-efficiency pumps are hidden
outside the pond and operate silently for years to keep your pond water
crystal-clear. (Purchase separately)
7. Bottom Drain (optional). Recommended for heavy fish loads and ponds over
2' deep.
8. We recommend 45 mil, fish-safe PondGuard© (from FireStone) liners
with or without underlayment depending on soil conditions. (Purchase
separately)
9. Rocks and gravel in the stream and pond can be used to hide and protect
the liner, and add a huge biological substrate for pond bacteria and natural
aquatic landscaping without the need for pots.
10. Underwater lights make your pond sparkle at night. (Optional).
11. Ultraviolet Light Sterilizer (optional).
12. A built-in waterfall ledge holds the waterfalls stone. Water flows downstream
from the biological filter into the pond aerating the water as it cascades.
13. Flexible piping simplifies installation to save time.
14. Flexible piping if freezing risk; rigid piping for warm climates
15. Optional gravel/rock plant mesh baskets or adjustable rock shelf hide
the filter edges and create plant filter pockets. Typically requires only
annual cleaning.
*Bottom Drain Benefits: For years pond keepers have sought an easy way to
install both bottom drains and surface skimmers. Proponents of skimming systems
argued it was best to catch the debris while it floated before it could sink.
Bottom drain proponents correctly argued that some debris, fish waste and
ammonia simply fell to the bottom of the pond and the bottom drain was the
best way to remove it. VOILA...PSM is proud to offer a single filter system
that does both.... surface skim and bottom drain. |
|
